Teflon Lined Tee

Elite manufactures lined pipe and fittings by use compression molding, isostatic molding, injection molding, transfer molding, hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:
Working temperature is high at the range of -29oC-200oC; except the molten alkali metals, element fluorine and aromatic hydrocarbon, lined products can be used in any chemical medium.
Vacuum resistance. In the range of -29oC-150oC, it is applicable for vacuum condition. In chemical production, the vacuum condition occurs due to cooling, longitudinal emissions, or medium backflow.
High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0MPa.
Resistance to penetration. Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining processing, make it excellent anti-osmosis.
PTFE advanced lining molding process achieved the status of synchronous hot expansion or cold shrinkage for steel components and fluorine plastic.
Elite adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide convenience for installation.
Specific gravity: 2.14-2.19g/cm3 as per ASTM D 792 test standard.
Tensile rate: 20.7Mpa minimum as per ASTM D 638 test standard
Elongation rate: 250% minimum as per ASTM D 638 test standard.

Attribute	Description

Pipe Material

ASTM A106

Lining Material

PTFE, PO, PE, PP

Flange Material

SS304, SS304L, SS316, SS316L, ASTM A3

Nominal Diameter

NPS 1-24

Pressure Range

150lb, 300lb, JIS 10k, DIS

Connection Type

Flange Connection

Type: Equal
Material: Carbon Steel
Lateral: 90°Tee
Finish: Anti Rust Oil
Standard: ANSI
Size: Dn25~600
Medium: Corrosion Medium

Transport Package: Plywood
Connection: Flange
Shape: Equal Tee
Head Code: Round
Technics: Casting
Certification: CE
Materials: Wcb+PTFE

Related Products